MX-160 — 5 off for the Charlotte plant

Adaptive unavailableMark sent & close

Ready to sendLow riskCascade FoodsACC-10102Charlotte processing plant, Charlotte NCMarcus OyelaranReceived 32d ago

Deterministic

Recommended

MX-160× 5

MX-160 magnetic-drive sealless pump, 35 m³/h

The part the customer asked for, as requested.

Fulfillment

5 from Atlanta

Delivers Sep 25, 2026

Quote total

$41,309.20

QT-2026-1041 · incl. $369.20 freight

Released

Approved and released to the customer response

Samuel Arroyos.arroyo@cascadefoods.example·Email · Sep 19, 9:00 AM

MX-160 — 5 off for the Charlotte plant

Morning, Could you price up 5 off MX-160 for us? Same as the units on the glycol skid — 316 stainless, ATEX Zone 1 area, 460V 3ph, DN50 connections, running around 35 m3/h at 90 C. No great rush but I'd like them on site inside the month.

Read message

Understood requirementsWhat every compatibility check was run against9 stated1 inferred1 missing

Flow rate≥ 35 m³/hStated
Written in the customer's message
“Morning, Could you price up 5 off MX-160 for us? Same as the units on the glycol skid — 316 stainless, ATEX Zone 1 area, 460V 3ph, DN50 connections, running around 35 m3/h at 90 C.”
Fluid temperature≥ 90 °CStated
Written in the customer's message
“Morning, Could you price up 5 off MX-160 for us? Same as the units on the glycol skid — 316 stainless, ATEX Zone 1 area, 460V 3ph, DN50 connections, running around 35 m3/h at 90 C.”
Pump must be rated at or above this fluid temperature.
Hazardous area ratingATEX Zone 1Stated
Written in the customer's message
“Morning, Could you price up 5 off MX-160 for us? Same as the units on the glycol skid — 316 stainless, ATEX Zone 1 area, 460V 3ph, DN50 connections, running around 35 m3/h at 90 C.”
Area classification is a regulatory requirement and cannot be traded off.
Pipe connectionDN50Stated
Written in the customer's message
“Morning, Could you price up 5 off MX-160 for us? Same as the units on the glycol skid — 316 stainless, ATEX Zone 1 area, 460V 3ph, DN50 connections, running around 35 m3/h at 90 C.”
Quantity5 unitsStated
Written in the customer's message
“MX-160 — 5 off for the Charlotte plant.”
Referenced partMX-160Stated
Written in the customer's message
“MX-160 — 5 off for the Charlotte plant.”
Part number named in the request; used as the reference for inferred requirements.
Ship-to locationCharlotte processing plantStated
Written in the customer's message
“charlotte”
Supply voltage460 V 3phStated
Written in the customer's message
“Morning, Could you price up 5 off MX-160 for us? Same as the units on the glycol skid — 316 stainless, ATEX Zone 1 area, 460V 3ph, DN50 connections, running around 35 m3/h at 90 C.”
Wetted material316 stainless steelStated
Written in the customer's message
“Morning, Could you price up 5 off MX-160 for us? Same as the units on the glycol skid — 316 stainless, ATEX Zone 1 area, 460V 3ph, DN50 connections, running around 35 m3/h at 90 C.”
Installed footprint≈ 760 mmInferred
Derived from the part the customer already runs
“Currently running MX-160”
Replacement should sit within the MX-160 footprint (760 mm) to reuse the existing baseplate.
75% confidence
Required byNot statedMissing
Not present in the request
No delivery date or window is stated. Availability is assessed against stock only.

Technical validation

Every value compared by the rule engine, with the data-sheet section it came from. A hard failure rules a part out; no model can override it.

Requirement	Recommended MX-160Recommended	Alternative MX-180Viable	Alternative AX-200Rejected	Alternative AX-220Rejected	Alternative PX-400Rejected
Pipe connection Needs DN50 Hard requirement	ANSI 150# flange DN50 2in DS-1026 §3.1	ANSI 150# flange DN50 2in DS-1027 §3.1	ANSI 150# flange DN50 2in DS-1001 §3.1	ANSI 150# flange DN50 2in DS-1002 §3.1	ANSI 150# flange DN50 2in DS-1017 §3.1
Installed footprint Needs 760 mm Soft · warns, does not block	760 mm DS-1026 §5.1	820 mm DS-1027 §5.1	780 mm DS-1001 §5.1	840 mm DS-1002 §5.1	810 mm DS-1017 §5.1
Flow rate Needs at least 35 m³/h Hard requirement	35 m³/h DS-1026 §2.2	55 m³/h DS-1027 §2.2	40 m³/h DS-1001 §2.2	60 m³/h DS-1002 §2.2	35 m³/h DS-1017 §2.2
Hazardous area rating Needs ATEX Zone 1 Hard requirement	ATEX II 2G Zone 1 DS-1026 §4.1	ATEX II 2G Zone 1 DS-1027 §4.1	None — general purpose DS-1001 §4.1	None — general purpose DS-1002 §4.1	None — general purpose DS-1017 §4.1
Wetted material Needs 316 stainless steel Hard requirement	316 stainless steel DS-1026 §3.1	316 stainless steel DS-1027 §3.1	316 stainless steel DS-1001 §3.1	316 stainless steel DS-1002 §3.1	316 stainless steel DS-1017 §3.1
Fluid temperature Needs at least 90 °C Hard requirement	140 °C DS-1026 §2.1	150 °C DS-1027 §2.1	120 °C DS-1001 §2.1	120 °C DS-1002 §2.1	190 °C DS-1017 §2.1
Supply voltage Needs 460 V 3ph Hard requirement	460 V 3ph 60 Hz DS-1026 §3.2	460 V 3ph 60 Hz DS-1027 §3.2	460 V 3ph 60 Hz DS-1001 §3.2	460 V 3ph 60 Hz DS-1002 §3.2	460 V 3ph 60 Hz DS-1017 §3.2

5 more parts were screened and ruled out

PX-422
Hazardous area rating None — general purpose — needs ATEX Zone 1PX-422 high-temperature process pump, 195 °C
PX-440
Hazardous area rating None — general purpose — needs ATEX Zone 1PX-440 high-temperature process pump, 205 °C
PX-460
Hazardous area rating ATEX II 3G Zone 2 — needs ATEX Zone 1PX-460 high-temperature process pump, 230 °C
PX-480
Pipe connection ANSI 150# flange DN80 3in — needs DN50PX-480 high-temperature process pump, 300 °C
PX-500
Pipe connection ANSI 150# flange DN100 4in — needs DN50PX-500 high-temperature process pump, 350 °C

Evidence

7 claims behind the decision, each tied to a section of a document in the technical library. Open one to read the source.

MX-160Recommended — the values it was accepted on7 cited claims

MX-160 pipe connection: ANSI 150# flange DN50 2in.DS-1026 §3.1
MX-160 product data sheet · §3.1 Mechanical construction
Open in library
Inlet connection: ANSI 150# flange DN50 2in Outlet connection: ANSI 150# flange DN50 2in Wetted material: 316 stainless steel Seal / elastomer: Sealless — magnetic coupling, no dynamic seal Bearing arrangement: Product-lubricated silicon carbide Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.
Supports: MX-160 pipe connection: ANSI 150# flange DN50 2in.
MX-160 installed footprint: 760 mm.DS-1026 §5.1
MX-160 product data sheet · §5.1 Dimensions and weight
Open in library
Overall length: 760 mm Overall width: 334 mm Overall height: 395 mm Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.
Supports: MX-160 installed footprint: 760 mm.
MX-160 flow rate: 35 m³/h.DS-1026 §2.2
MX-160 product data sheet · §2.2 Hydraulic performance
Open in library
Max flow rate: 35 m³/h Max head: 40 m NPSH required: 3.8 m Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.
Supports: MX-160 flow rate: 35 m³/h.
MX-160 hazardous area rating: ATEX II 2G Zone 1.DS-1026 §4.1
MX-160 product data sheet · §4.1 Certification and area classification
Open in library
Duty: Continuous Hazardous area rating: ATEX II 2G Zone 1 Certifications: CE, ATEX 2014/34/EU, UL 778 Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.
Supports: MX-160 hazardous area rating: ATEX II 2G Zone 1.
MX-160 wetted material: 316 stainless steel.DS-1026 §3.1
MX-160 product data sheet · §3.1 Mechanical construction
Open in library
Inlet connection: ANSI 150# flange DN50 2in Outlet connection: ANSI 150# flange DN50 2in Wetted material: 316 stainless steel Seal / elastomer: Sealless — magnetic coupling, no dynamic seal Bearing arrangement: Product-lubricated silicon carbide Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.
Supports: MX-160 wetted material: 316 stainless steel.
MX-160 fluid temperature: 140 °C.DS-1026 §2.1
MX-160 product data sheet · §2.1 Process limits
Open in library
Max fluid temperature: 140 °C Min fluid temperature: -30 °C Max discharge pressure: 14 bar Max viscosity: 150 cP Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.
Supports: MX-160 fluid temperature: 140 °C.
MX-160 supply voltage: 460 V 3ph 60 Hz.DS-1026 §3.2
MX-160 product data sheet · §3.2 Electrical supply and motor
Open in library
Supply voltage: 460 V 3ph 60 Hz Ingress protection: IP55 Motor rating: 5.5 kW Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.
Supports: MX-160 supply voltage: 460 V 3ph 60 Hz.

Fulfillment

Available-to-promise is on-hand stock less what is already reserved for other orders.

MX-1605 unitsSingle shipment

Atlanta5

On-hand stock · ATLReady Sep 23

Freight

Ground$369.20

Estimated delivery

Sep 25, 2026

Customer needs it by

Not stated

Commercials

Quote QT-2026-1041 · valid until Oct 22, 2026

Account tier StandardPrice book Standard distributorPayment terms Net 30 daysCredit limit $300,000.00

Part	Qty	List	Discount	Unit price	Price source	Extended
MX-160 MX-160 magnetic-drive sealless pump, 35 m³/h	5	$8,900.00	8.0%	$8,188.00	Price Book	$40,940.00

On the quotation

Subtotal at list: $44,500.00
Customer discount: −$3,560.00
Net goods: $40,940.00
Freight · Ground: $369.20

Total$41,309.20

View quotation QT-2026-1041

Internal only

Never sent to the customer

Cost of goods: $26,700.00
Freight, billed at cost: $369.20
Gross margin: $14,240.00

Margin34.5%

Policy floor 22% · 12.5% above floor

Repricing is switched off. This public demo is read-only, so every visitor sees the same data. Clone the repository to use this — it works locally.

Customer response

Draft v1 · generated from the case's computed facts, not yet edited

Customer-safeDrafted from computed factsQuote released

Subject

Hi Samuel,

Thanks for the enquiry. Here's where we've landed.

We can supply the MX-160 as requested:

• 5 × MX-160 — MX-160 magnetic-drive sealless pump, 35 m³/h
• Unit price: $8,188.00
• Line total: $40,940.00
• Freight: $369.20
• Total: $41,309.20

Availability
• 5 units in stock at our Atlanta distribution centre, ready to ship 2026-09-23

Quotation QT-2026-1041 is valid until 2026-10-22.
Estimated delivery to site: 2026-09-25.

Happy to walk through any of this on a call.

Best regards,
Marcus Oyelaran

Agent activity

Each step is a recorded tool call, in the order it ran. The sentence is what the tool reported at the time — not a summary written afterwards.

Mode

Deterministic pipeline

Tool calls

Duration

318 ms

Audit trail6 events · append-only

Audit trail

Append-only. What happened, when, and who caused it.

Sep 22, 11:21 PM
Request received by email from Samuel Arroyo at Cascade Foods.
Samuel Arroyo
Sep 22, 11:21 PM
Assigned to Marcus Oyelaran.
Routing
Sep 22, 11:21 PM
Analysis started using the deterministic local provider.
Sales Engine
Sep 22, 11:21 PM
5 × MX-160 as requested, available from stock
Sales Engine
Sep 22, 11:21 PM
Quote QT-2026-1041 released for $41,309.20. Released without approval — every policy check was inside limits.
Sales Engine
Sep 22, 11:21 PM
Customer-facing response drafted from the approved quote.
Sales Engine