PX-400 product data sheet

PX-400 high-temperature process pump, 190 °C. Centre-line mounted high-temperature process pump with finned bearing housing and high-temperature cartridge seal. Rated to 190 °C, 35 m³/h at 42 m head. This data sheet states the published limits for the PX-400. Selection outside these limits requires written application-engineering approval.

Max fluid temperature: 190 °C Min fluid temperature: -20 °C Max discharge pressure: 14 bar Max viscosity: 400 cP Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Max flow rate: 35 m³/h Max head: 42 m NPSH required: 2.6 m Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Inlet connection: ANSI 150# flange DN50 2in Outlet connection: ANSI 150# flange DN50 2in Wetted material: 316 stainless steel Seal / elastomer: High-temperature cartridge seal, SiC/SiC, flexible graphite Bearing arrangement: Oil-lubricated angular contact, finned housing Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Supply voltage: 460 V 3ph 60 Hz Ingress protection: IP55 Motor rating: 7.5 kW Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Duty: Continuous Hazardous area rating: None — general purpose Certifications: CE, UL 778, API 610 OH2 dimensional Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Overall length: 810 mm Overall width: 340 mm Overall height: 446 mm Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Standard factory lead time for the PX-400 is 35 calendar days from order acknowledgement when stock is not available. Lifecycle status at this revision: active.