AX-220 ANSI process pump, 60 m³/h
Horizontal end-suction process pump, 316 stainless wetted parts, single cartridge mechanical seal. Rated 60 m³/h at 46 m head.
Specification
The values the compatibility engine compares against
- Max fluid temperature
- 120 °C
- Max discharge pressure
- 14 bar
- Max viscosity
- 200 cP
- Min fluid temperature
- -20 °C
- Max flow rate
- 60 m³/h
- Max head
- 46 m
- NPSH required
- 2.8 m
- Bearing arrangement
- Grease-lubricated deep groove ball
- Inlet connection
- ANSI 150# flange DN50 2in
- Outlet connection
- ANSI 150# flange DN50 2in
- Seal / elastomer
- Single cartridge mechanical seal, carbon/SiC, FKM elastomer
- Wetted material
- 316 stainless steel
- Ingress protection
- IP55
- Motor rating
- 11 kW
- Supply voltage
- 460 V 3ph 60 Hz
- Certifications
- CE, UL 778
- Duty
- Continuous
- Hazardous area rating
- None — general purpose
- Overall height
- 455 mm
- Overall length
- 840 mm
- Overall width
- 360 mm
Stock by location
Available to promise is on hand less reserved
| Location | Zone | On hand | Reserved | ATP | Safety | Inbound |
|---|---|---|---|---|---|---|
| Dallas distribution centreDAL | South Central | 9 | 2 | 7 | 3 | — |
| Houston distribution centreHOU | South Central | 8 | 2 | 6 | 3 | — |
| Atlanta distribution centreATL | Southeast | 0 | 0 | 0 | 0 | — |
| Chicago central warehouseCHI | Midwest | 4 | 0 | 4 | 3 | — |
| Edison distribution centreEDI | Northeast | 3 | 3 | 0 | 2 | — |
| Reno distribution centreRNO | West | 0 | 0 | 0 | 0 | — |
Technical documentation
What the engine cites when it recommends this part
Replacement relationships
Curated by engineering; still re-validated on every case
Standard route when an AX-220 duty moves above 120 °C. Shares the DN50 connection and sits within the AX-220 baseplate envelope.
Higher-temperature alternative. Note the DN40 suction — existing DN50 pipework needs an adapter.
Lowest-cost high-temperature option, but hydraulically smaller than the AX-220.
Where duty may rise beyond 205 °C later. Larger frame — confirm the baseplate before quoting.
Sealless alternative where emissions matter more than temperature headroom.
Accessories
- SK-2200optional
Recommended spare cartridge seal.
Commercial
Internal — cost and margin are never customer-facing
- List price
- $5,180.00
- Standard cost
- $3,108.00
- Margin at list
- 40.0%
- Weight
- 122 kg
- Category
- Standard centrifugal process pumps