AX-220 product data sheet

AX-220 ANSI process pump, 60 m³/h. Horizontal end-suction process pump, 316 stainless wetted parts, single cartridge mechanical seal. Rated 60 m³/h at 46 m head. This data sheet states the published limits for the AX-220. Selection outside these limits requires written application-engineering approval.

Max fluid temperature: 120 °C Min fluid temperature: -20 °C Max discharge pressure: 14 bar Max viscosity: 200 cP Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Max flow rate: 60 m³/h Max head: 46 m NPSH required: 2.8 m Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Inlet connection: ANSI 150# flange DN50 2in Outlet connection: ANSI 150# flange DN50 2in Wetted material: 316 stainless steel Seal / elastomer: Single cartridge mechanical seal, carbon/SiC, FKM elastomer Bearing arrangement: Grease-lubricated deep groove ball Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Supply voltage: 460 V 3ph 60 Hz Ingress protection: IP55 Motor rating: 11 kW Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Duty: Continuous Hazardous area rating: None — general purpose Certifications: CE, UL 778 Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Overall length: 840 mm Overall width: 360 mm Overall height: 455 mm Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Standard factory lead time for the AX-220 is 30 calendar days from order acknowledgement when stock is not available. Lifecycle status at this revision: active.