DG-40 product data sheet

DG-40 air-operated diaphragm pump, 14 m³/h. Air-operated double-diaphragm transfer pump, Polypropylene body with santoprene diaphragm. Runs dry and handles entrained solids. This data sheet states the published limits for the DG-40. Selection outside these limits requires written application-engineering approval.

Max fluid temperature: 95 °C Min fluid temperature: 0 °C Max discharge pressure: 7 bar Max viscosity: 20,000 cP Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Max flow rate: 14 m³/h Max head: 71 m NPSH required: 1.2 m Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Inlet connection: ANSI 150# flange DN40 1.5in Outlet connection: ANSI 150# flange DN40 1.5in Wetted material: Polypropylene Seal / elastomer: Santoprene diaphragm Bearing arrangement: None — reciprocating diaphragm Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Supply voltage: Not applicable — compressed air driven Motor rating: 0 kW Ingress protection: Not applicable — no electrical parts Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Hazardous area rating: ATEX II 2G Zone 1 Certifications: CE, ATEX 2014/34/EU Duty: Intermittent Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Overall length: 400 mm Overall width: 240 mm Overall height: 340 mm Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Standard factory lead time for the DG-40 is 18 calendar days from order acknowledgement when stock is not available. Lifecycle status at this revision: active.