RG-80 product data sheet

RG-80 internal gear pump, 16 m³/h. Internal gear pump for viscous media up to 50,000 cP. Cast iron ASTM A48 construction with hardened rotor and idler. This data sheet states the published limits for the RG-80. Selection outside these limits requires written application-engineering approval.

Max fluid temperature: 180 °C Min fluid temperature: -10 °C Max discharge pressure: 14 bar Max viscosity: 50,000 cP Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Max flow rate: 16 m³/h Max head: 143 m NPSH required: 2.2 m Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Inlet connection: ANSI 150# flange DN40 1.5in Outlet connection: ANSI 150# flange DN40 1.5in Wetted material: Cast iron ASTM A48 Seal / elastomer: Single mechanical seal, carbon/SiC, FKM elastomer Bearing arrangement: Bronze journal, product lubricated Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Supply voltage: 460 V 3ph 60 Hz Ingress protection: IP55 Motor rating: 4 kW Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Duty: Continuous Hazardous area rating: None — general purpose Certifications: CE, UL 778 Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Overall length: 640 mm Overall width: 294 mm Overall height: 371 mm Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Standard factory lead time for the RG-80 is 25 calendar days from order acknowledgement when stock is not available. Lifecycle status at this revision: active.