PX-480 product data sheet

PX-480 high-temperature process pump, 300 °C. Centre-line mounted high-temperature process pump with finned bearing housing and high-temperature cartridge seal. Rated to 300 °C, 120 m³/h at 64 m head. This data sheet states the published limits for the PX-480. Selection outside these limits requires written application-engineering approval.

Max fluid temperature: 300 °C Min fluid temperature: -20 °C Max discharge pressure: 22 bar Max viscosity: 400 cP Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Max flow rate: 120 m³/h Max head: 64 m NPSH required: 3.9 m Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Inlet connection: ANSI 150# flange DN80 3in Outlet connection: ANSI 150# flange DN80 3in Wetted material: 316 stainless steel Seal / elastomer: High-temperature cartridge seal, SiC/SiC, flexible graphite Bearing arrangement: Oil-lubricated angular contact, finned housing Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Supply voltage: 460 V 3ph 60 Hz Ingress protection: IP55 Motor rating: 22 kW Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Duty: Continuous Hazardous area rating: ATEX II 2G Zone 1 Certifications: CE, UL 778, API 610 OH2 dimensional Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Overall length: 1,090 mm Overall width: 458 mm Overall height: 600 mm Values are continuous ratings at the published reference conditions. Intermittent excursions are not covered by this data sheet.

Standard factory lead time for the PX-480 is 55 calendar days from order acknowledgement when stock is not available. Lifecycle status at this revision: active.