AX-260 ANSI process pump, 110 m³/h
List price
$7,350.00
Available to promise
0
Factory lead time
65 days
AX-260End Of LifeAX Series
Horizontal end-suction process pump, 316 stainless wetted parts, single cartridge mechanical seal. Rated 110 m³/h at 58 m head.
Specification
The values the compatibility engine compares against
Process
- Max fluid temperature
- 120 °C
- Max discharge pressure
- 16 bar
- Max viscosity
- 200 cP
- Min fluid temperature
- -20 °C
Hydraulic
- Max flow rate
- 110 m³/h
- Max head
- 58 m
- NPSH required
- 3.6 m
Mechanical
- Bearing arrangement
- Grease-lubricated deep groove ball
- Inlet connection
- ANSI 150# flange DN80 3in
- Outlet connection
- ANSI 150# flange DN80 3in
- Seal / elastomer
- Single cartridge mechanical seal, carbon/SiC, FKM elastomer
- Wetted material
- 316 stainless steel
Electrical
- Ingress protection
- IP55
- Motor rating
- 18.5 kW
- Supply voltage
- 460 V 3ph 60 Hz
Compliance
- Certifications
- CE, UL 778
- Duty
- Continuous
- Hazardous area rating
- None — general purpose
Physical
- Overall height
- 505 mm
- Overall length
- 980 mm
- Overall width
- 410 mm
Stock by location
Available to promise is on hand less reserved
| Location | Zone | On hand | Reserved | ATP | Safety | Inbound |
|---|---|---|---|---|---|---|
| Dallas distribution centreDAL | South Central | 0 | 0 | 0 | 0 | — |
| Houston distribution centreHOU | South Central | 0 | 0 | 0 | 0 | — |
| Atlanta distribution centreATL | Southeast | 0 | 0 | 0 | 0 | — |
| Chicago central warehouseCHI | Midwest | 0 | 0 | 0 | 0 | — |
| Edison distribution centreEDI | Northeast | 0 | 0 | 0 | 0 | — |
| Reno distribution centreRNO | West | 0 | 0 | 0 | 0 | — |
Technical documentation
What the engine cites when it recommends this part
Replacement relationships
Curated by engineering; still re-validated on every case
AX-262 is the drop-in factory successor to the end-of-life AX-260. Same footprint, same connections, revised impeller with a marginally higher best-efficiency point.
Commercial
Internal — cost and margin are never customer-facing
- List price
- $7,350.00
- Standard cost
- $4,410.00
- Margin at list
- 40.0%
- Weight
- 172 kg
- Category
- Standard centrifugal process pumps